DVC Machine Shop

DVC is a great little local machine shop. That skill is hard to find these days. They did some work on my Mitsubishi VR-4 block and heads and recently resurfaced the heads on my Ford Triton 5.4L 2V heads. Quick turnaround and excellent service.

i had this shop do a jeep 4cyl head that I nicked the valve seat on porting it oops... he told me he could replace all valve seats and valve grind , told me done in 3 to 4 days after calling 3 or 4 times , 3 weeks later got head back it was nasty looking hot tank is not good. , got head home and every one of the valve leaked .. you could see light though them .had to have it redone at a different place.

Had them assemble my ls3 stroker engine. With forged internals from Texas speed. Engine had low oil pressure at idle. Was told 15psi hot was ok. Tore engine down myself to find the issue. The oil diverted barbell was installed backwards with oring on the inside of engine causing internal oil leak. Also #4 main cap installed backwards. Pan bolt stripped out and RTV on the head to hold bolt in. Timing chain tensioner mis installed and came apart. Engine had less than 1500 miles on it. Main and rod bearings completely shot. Have a $7000 paperweight.

This shop pressure tested, resurfaced and replaced 2 valves on a pair of heads off a 02 montero sport that i was working on. Heads looks brand new when I got it back and after installing the heads the vehicle ran smooth. Guys did a great job, turn around time was about 4 weeks. Highly recommend them they are knowledgeable. 5 star!

Nice people and exhalent work this is just a couple of motor they help me with thanks Dennis and dave